Sistema de controlo remoto Scanreco Joystick RC400 G2B Maxi 2 com Walvoil DPX100 de 8 seções para equipamento florestal
≈ 6 908 US$
Se decidir comprar equipamento a baixo preço, certifique-se de que contacta com o verdadeiro vendedor. Obtenha todas as informações possíveis sobre o proprietário do equipamento. Uma das formas de enganar potenciais clientes consiste em apresentarem-se como uma empresa real. Caso tenha suspeitas, informe-nos sobre as mesmas, para que possamos proceder a controlos adicionais, através do formulário destinado a transmitir comentários e opiniões.
Antes de efetuar uma compra, analise atentamente vários ofertas, para ter uma ideia do preço médio de venda do equipamento que escolheu. Se o preço da oferta que mais lhe agrada for muito inferior ao de outras ofertas idênticas, desconfie. Uma diferença de preço significativa pode indicar defeitos ocultos no equipamento ou uma tentativa de cometer atos fraudulentos por parte do vendedor.
Não compre produtos cujo preço se afaste marcadamente do preço médio de produtos similares.
Não efetue pagamentos por conta nem adquira produtos pré-pagos duvidosos. Em caso de dúvida, não receie pedir esclarecimentos e fotografias e documentação adicionais do equipamento, verificar a autenticidade de documentos e fazer perguntas.
É o tipo de fraude mais comum. Vendedores desonestos podem pedir um pagamento por conta ou sinal para assegurar a "reserva" do equipamento. Desta forma, os falsos vendedores podem conseguir um elevado montante e desaparecer, deixando de contactar os compradores e ficando incontactáveis.
- A realização do pagamento por conta com cartão
- Não efetue qualquer pagamento por conta sem documentos que confirmem a transferência do dinheiro, caso tenha dúvidas sobre o vendedor.
- A transferência do pagamento por conta para a conta do “administrador”
- Um pedido desta natureza deve alertá-lo, pois é muito provavelmente sinónimo de que está a negociar com um burlão.
- A transferência do pagamento por conta para a conta de uma empresa com o mesmo nome
- Seja cauteloso, os burlões podem utilizar nomes de empresas muito conhecidas, aos quais introduzem alterações quase impercetíveis. Se tiver a menor dúvida quanto ao nome da empresa, não efetue qualquer transferência.
- A substituição de dados na fatura de uma empresa real
- Antes de efetuar uma transferência, certifique-se de que os dados indicados estão corretos e que correspondem à empresa especificada.
Contactos do vendedor
+48 663 39...
Mostrar
+48 663 399 034
Polónia
Polónia
Scanreco G2B Maxi 2 joysticks 12/24V. Also available with 6 or 8 pads.
This kit is configured for the most popular machine settings, supporting up to 8 standard forest crane functions. If you require a different dedicated configuration, we can customize it to meet your needs, including variations in spools, voltage, the number of sections, anti-shock valves, connectors, etc. The relief valve can also be adjusted as required. Spool type and flow can be individually selected to suit your application. Please send us a diagram, and we can assist further.
The kit is designed for plug-and-play convenience. We handle everything from the plugs to the software configuration.
We provide technical support and are readily available via email, whatsup and telephone.
After placing an order, the flow and pressure can be fully adapted to the machine according to the customer's specific requirements.
--
Scanreco RC400 Radio Remote Control Systems.
The Scanreco RC 400 G2B remote control system has been especially developed for hydraulically driven mobile cranes and machinery. The system is a digital remote control system based on an extremely advanced microprocessor technology. Years of exhaustive and demanding testing have shown that the remote control system can cope with the roughest of environments.
The system is protected against electromagnetic and radio frequency radiation and can be installed onto all hydraulic valve types (voltage, current pulse width, or protocol steered) found on the market.
In its basic form the remote control system is comprised of a portable control unit with manoeuvre levers for proportional control and switches for ON/OFF functions, a central unit with connection cable for driving proportional electro-hydraulic slide controllers.
Digitally coded control information (lever deflection and switch position) is sent from the portable control unit via radio to the central unit. The portable control unit and central unit translate the magnitude and direction of the manoeuvre lever deflections and switch position.
It can be used for eight typical proportional functions, e.g.
-Slewing (rotation of crane)
-Main lift
-Jib
-Extension
-Grab open / close
-Rotator
--
Scanreco G2B Maxi with 2 Joysticks
- 2 three-axis joysticks
- Stop function according to EN ISO 13849-1 Cat. 3, PL e
- Various toggle switches, buttons and rotary switches
- Frequency bands: 433-434 or 902-928MHz (other frequencies available on request)
- Operating range > 100 m / > ~330 ft.
- Degree of protection: IP65
- Operating temperature: -20°C to +70°C / ~-4°F to +160°F
- Cable control: standard length 10 meters / ~33 ft.
- G2B Receiver PWM 12 or 24 VDC power supply
- Choice of radio or cable control
- 8 bi-directional proportional outputs
- All analog outputs are programmable for final setting of speeds
- 14 digital outputs (where 1 is combined input/output) and 4 digital inputs (where 1 is combined input/output)
- A DV output to control the dump valve
- Radio communication in the ISM band using frequency hopping technology
- Manual mode available to bypass the radio system, providing only the DV output and allowing manual control via the hydraulic manifold (where available).
- Programmable logic with block, soak, decelerate, ramp functions and much more
- Please note that cable sets or connection plug sets are NOT included in the scope of delivery and must be ordered separately if required.
- Dimensions: (W x H x D): 350 x 160 x 190 mm / ~13.78 x 6.30 x 7.48 inches (without color display)
--
Hydraulic, sectional valve Walvoil DPX 100 with compensation, full proportional.
Directional valve of the DPX series and the most versatile and complete. Highly configurable and versatile for applications such as Miniexcavators, Aerial platform, Truck Mounted Cranes, Telehandlers, Agricultural and Forestry machines.
- Valve model for high pressure applications (HP), inspheroidal graphite cast iron
- Optional spool position sensors
- Valve configurations with high flow sections (HF)
- Special inlet sections designed for steering applications
- Synergy with the Walvoil electronic systems range
- Inlet sections with or without by-pass valve
- Manual, hydraulic and proportional electro-hydraulic controls
Technical specifications of default configuration:
Inlet section: 32GPM 120l/min - Pmax 300 bar 4351psi Power supply port: 3/4" BPS, tank return port: 3/4" BPS
1st Main Boom 60l/min 16GPM Anti shock valves 190/80 bar 2755/1305psi A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever
2nd Boom 60 l/min 16GPM Anti Shock valves 190/220 bar 2755/3190psi A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever
3rd Slewing 40 l/min 10GPM Anti Shock valves 200/200 bar 2900/2900psi A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever
4th Extension 80l/min 21GPM Anti Shock valve 140 bar/plugged bar 2030psi side A 4/3 center; A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever
5th Rotator 20 l/min 5GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever
6th Grapple 60 l/min 16GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever
7th Support Left Leg 20 l/min 5GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever; Spool: 20L/min; No Anti-shock valves
8th Support Right Leg 20/min 5GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever; Spool: 60L/min; No Anti-shock valves
Outlet section: with the possibility of combining valves, with bleed valve (LS relief), with pressure reducing valve. Control connection "V" and drainage connection "L" closed. Side connections "T1", "P1", "LS1" closed. DBV fixed and sealed to 175 bar at 90L/min.
--
If you need any other configuration or an extended number of sections, please contact us for details!